Call both, but in the right order: stop the water and fix the leak with a plumber, and call a water damage restoration company to remove the water and dry the building. If water is still flowing, shut off the main valve first, because neither trade can do their job until the flow stops.
In West Jordan, winter freezes make this question urgent every November. This guide explains what each trade actually does, how the two fit together, and how to decide who to call first when you are standing in a wet basement.
What does a plumber do after a water leak?
A plumber finds why the water escaped and repairs or replaces the failed part of your plumbing system. That means a split supply line, a failed fitting, a cracked drain, a leaking water heater connection, or a failed shutoff valve.
The plumber's work ends at the pipe. A plumber typically does not dry wet framing, set air movers and dehumidifiers, or track moisture readings through walls and floors. Those jobs belong to restoration.
If you do not yet know where the leak is, a plumber can trace it and confirm the system is safe to turn back on. That step matters, because turning the water back on with a damaged line behind a wall only restarts the loss.
What does a water damage restoration company do?
A water damage restoration company removes water from the building and dries the structure so the damage stops spreading. That starts with pumps and extractors for standing water, and moves on to moisture meters, air movers, and dehumidifiers for what the water soaked into.
Restoration crews also decide what must be removed. Wet carpet pad, saturated insulation, and drywall that has wicked water up the wall often come out, while solid framing can usually be dried in place. The industry reference for this work is the IICRC S500 standard, which sorts water into Category 1, 2, and 3 and drying into classes.
Standing water in a lower level is a good example. Water Extraction in West Jordan is the first stage of that work, and it is not something a plumber is set up to do.
Who should you call first, a plumber or a restoration company?
Call a plumber first only when you cannot stop the water yourself; otherwise call restoration first, because the clock on mold and material damage is already running. If you can close the main valve, the leak is stopped for now and drying can start while a plumber schedules the repair.
Mold can begin to grow within 24 to 48 hours in damp conditions, and structural drying commonly takes 3 to 5 days. Waiting for a plumber to finish before drying starts can add days of moisture to the building.
The two jobs rarely conflict. Restoration crews can usually work around a repair, and a plumber can fix a line in a room that is being dried. Tell both about the other so they can coordinate access to walls and floors.
How should you handle a burst pipe in November?
A frozen pipe that bursts in a West Jordan home needs the main valve closed, power made safe, and both trades involved. The split often shows after the thaw, when water flows through the cracked section.
Restoration handles the wet drywall, insulation, and flooring, and the plumber replaces the section that failed. For the full process, Burst Pipe Water Damage in West Jordan covers what to do before help is on site.
Do not try to open ceilings or walls yourself to find the source, and do not climb on wet surfaces. If the plumber needs access, let a professional decide where to open, because the wrong cut can spread damage and add repair work.
Who handles sewage backups, floods, and storm water?
Sewage backups and storm flooding are restoration jobs more than plumbing jobs, with a plumber involved when a drain line is the cause. Water from a sewer or drain backup is classified as Category 3 under the IICRC S500 standard, which means it carries contamination and affected porous materials are usually removed.
For that situation, Sewage Cleanup in West Jordan involves containment and removal that goes well beyond mopping. A plumber can clear the line, and restoration deals with what the water touched.
Natural flooding follows the same split. Water entering through a foundation wall or window well is not a plumbing failure at all, so restoration comes first, and a plumber only joins if a sump pump or discharge line is part of the problem.
When does it make sense to start with restoration?
Start with a restoration company when the water is already out of the pipe and in the building. Wet drywall, damp carpet, a warped floor, or a musty smell all say the damage has moved past the plumbing.
That is the core of Water Mitigation in West Jordan: limiting the damage as quickly as possible so the repair stays smaller. A plumber then repairs the system once the area is under control.
- Standing water or soaked flooring: restoration.
- A dripping or hissing pipe you can see: shut the main, then plumber.
- Wet ceiling with an unknown source: shut the main, call both.
- Sewage in a tub, drain, or floor: restoration, with a plumber for the line.
When the source is unclear, call both and describe what you see. Neither will be surprised to hear about the other.
How does this work across Salt Lake County towns?
The same question comes up in every community on the west side of the valley. In Water Damage Restoration in Kearns, homes with finished basements can hide a leak for days behind new drywall, so restoration is often called after the damage is visible.
Out toward the south, Water Damage Restoration in Riverton covers larger newer homes where a long supply run through an unheated space can freeze and split, and a single failure can reach several rooms. In both cases the order is the same: stop the water, dry the building, repair the line.
How do the two jobs fit together on a typical loss?
On most losses the sequence runs in four steps, and the overlap between them is where homeowners save time. First you stop the water at the main valve. Second, restoration removes standing water and sets drying equipment. Third, the plumber repairs the failed line while equipment runs. Fourth, the crew finishes drying, checks moisture readings, and the building is ready for repairs to walls and floors.
Drying commonly takes 3 to 5 days, and plumbing repairs often fit inside that window. Rebuilding finishes such as drywall, paint, and flooring come after the readings show the structure is dry, and that stage is separate from restoration drying.
Keep the plumber's invoice and any notes about the failed part. They help explain the cause of the loss to your insurance company, and they help the restoration crew understand where the water came from.
What should you ask each trade?
Ask each trade plain questions about their part of the job, and ask the restoration company how it will work around the plumber. Good questions for a plumber include what failed, whether the line is safe to turn back on, and whether other sections of the same age or material are at risk.
For a restoration company, ask how the water is classified, what equipment will run and for how many days, how moisture will be tracked, and what typically gets removed. Ask what you should and should not touch in the meantime. Clear answers to those questions tell you more than a sales pitch does.
Common mistakes when deciding who to call
The most common mistake is waiting for one trade to finish before calling the other. These are the others.
- Calling only a plumber and assuming the repair ends the problem. Wet walls keep growing mold after the pipe is fixed.
- Calling only restoration and leaving the source unrepaired, which can restart the leak.
- Skipping photos and notes about the time the water was found.
- Assuming the leak is small because the visible spot is small.
- Skipping the call to your insurance company, who can tell you what they need for a claim.
Keep a simple log of who you called and what each said. It makes coordination easier and gives you a record if you file a claim.
When to call a professional
Call a restoration company whenever water has reached walls, floors, or contents, even if you are not sure it is serious. Water Damage Cleanup West Jordan is a call line that connects homeowners with an independent local water damage restoration company serving West Jordan and nearby Salt Lake County towns.
Tell the company you are connected with whether a plumber is already involved. They can explain what drying involves and how it fits around the repair.
Get help with Water Damage Restoration in West Jordan
If you need water removal or drying in West Jordan, call (385) 481-3042 and we connect you with a local water damage restoration company. Tell them what happened and they can walk you through next steps.